English
3
3
3
3

Melt Blown PP Sediment Filter Cartridge, 10 and 20 Inch Polypropylene Spun Filter for Water Purifiers

Melt blown PP sediment cartridge, 10 and 20 inch, for turbidity and rust.

Model
PP melt blown sediment filter cartridge
Media
Food grade polypropylene (PP)
Process
Thermal melt blown one piece molding; no binder
Lengths
10 inch / 20 inch / 30 inch / 40 inch
Precision
1 micron / 5 micron / 10 micron / 20 micron / 50 micron
Styles
Smooth surface; embossed; grooved
Max Working Temperature
60 degree C
Working Pressure
0.1-0.4 MPa recommended
Max Differential Pressure
0.2 MPa
Interface
Standard flat (DOE) end

Description

Product Description

The PP melt blown sediment filter cartridge is the most fundamental pre-filtration consumable in water treatment systems. It is made of food grade polypropylene through a thermal melt blown one piece molding process with no binder and no secondary pollution, which makes it the most widely used filter media for household; commercial and industrial water pre-treatment. Smooth; embossed and grooved surface styles are available; and different outer diameters and lengths fit standard filter housings of all common brands.

The core advantage is the gradient density structure: the outer layer has larger pores and the inner layer has finer pores, so particles are captured layer by layer across the whole wall thickness instead of only on the surface. The cartridge efficiently intercepts sediment; rust; suspended solids; colloid and insect egg particles in water, protecting downstream RO membranes and activated carbon cartridges from clogging and extending the service life of the entire purification equipment. With precision options from 1 micron to 50 micron and lengths up to 40 inches, one cartridge family covers the whole pre-filtration need from household purifiers to industrial reverse osmosis plants.

Key Features

  • Gradient density structure — outer coarse and inner fine pores capture particles layer by layer.
  • No binder molding — thermal melt blown PP is clean with no secondary pollution.
  • Full size range — 10 to 40 inch lengths and 1 to 50 micron precision options.
  • Three surface styles — smooth; embossed and grooved shells for different flow needs.
  • Wide compatibility — standard flat DOE ends fit mainstream filter housings.
  • System protection — intercepts sediment and rust to extend RO membrane life.

Product Images

Melt blown PP cartridge standing view

Melt blown PP cartridge standing view

Big Blue PP cartridge on grey background

Big Blue PP cartridge on grey background

Grooved surface PP cartridge

Grooved surface PP cartridge

Technical Specifications

Model PP melt blown sediment filter cartridge
Media Food grade polypropylene (PP)
Process Thermal melt blown one piece molding; no binder
Lengths 10 inch / 20 inch / 30 inch / 40 inch
Precision 1 micron / 5 micron / 10 micron / 20 micron / 50 micron
Styles Smooth surface; embossed; grooved
Max Working Temperature 60 degree C
Working Pressure 0.1-0.4 MPa recommended
Max Differential Pressure 0.2 MPa
Interface Standard flat (DOE) end

Applications

Household purifier pre-filtration; commercial water systems; industrial RO pre-treatment; whole house sediment removal.

Contact TIANJIN LZYUN ENVIRONMENTAL TECHNOLOGY CO., LTD. with your quantity and target price — our team will reply with a quotation and free sample arrangement within 24 hours.

Faq

What is the difference between CTO and GAC filter cartridges?

CTO cartridges use compressed and sintered carbon block, so the carbon is bound into a solid block that filters both mechanically and by adsorption. GAC (also called UDF) cartridges are filled with loose granular activated carbon, which gives a lower pressure drop and a higher flow rate but less fine particle retention. Many systems use a GAC stage for taste and chlorine removal and a CTO block for fine filtration.

Which micron rating should I choose for a PP sediment cartridge?

Most household and commercial pre-filters use 5 micron, which removes sand, rust and fine sediment without blocking too quickly. Use 1 micron when the downstream membrane needs extra protection, or 10 to 20 micron for well water and heavy sediment where the cartridge would otherwise clog within days.

Can you produce cartridges with our own brand and packaging?

Yes. We support OEM production, including printed labels, inner poly bags, colour boxes and master cartons with your artwork. Send the design files and the cartridge specification, and we will confirm the minimum quantity and lead time before production.

What is your minimum order quantity?

MOQ depends on the cartridge type, whether new tooling is needed and how the goods are packed. Tell us the specification and the quantity you plan to order, and we will confirm the MOQ together with the quotation.

How long does production and delivery take?

Stock cartridges can usually be shipped within a few days. Customised or private label orders depend on material availability and quantity. We confirm the schedule in writing with the quotation, and we can arrange shipment from Tianjin Port or by air for urgent orders.

Do your cartridges fit standard 10 inch and 20 inch housings?

Yes. Our standard cartridges follow common 2.5 inch and 4.5 inch diameters with 10 inch and 20 inch lengths, and fit standard housings from most suppliers. If your housing uses a non-standard length or thread, send the drawing and we can produce to your specification.

Related Products